Winter driving means black ice. For more information on this dangerous winter driving topic, we went to the experts at Accuweather.com. For your safety and that of your family, please take a moment to review this informative article on ... how to spot black ice.
Black ice forms when the air is at 32 degrees or below at the surface and rain is falling, according to AccuWeather Meteorologist Andrew Mussoline. The ground temperature causes the precipitation to freeze upon impact, thus creating ice. Sleet and the refreezing of snow or water can also generate black ice. This type of ice gets its name from its ability to blend in with its surroundings. It's called black ice because it tends to look like the rest of the pavement on the road, but it's actually clear. The complexion of black ice makes it extremely difficult to spot, but using a car thermometer as an initial gauge can be helpful in determining the road conditions. A car thermometer, like any digital thermometer, tries to find the air's ambient temperature. So, if a vehicle's thermometer is close to freezing, the car driver should be cautious on the roads. While the sensors themselves are usually very accurate, their placement on a vehicle can make them less reliable. Located outside the car, behind the front bumper, these sensors sometimes pick up heat from the car's engine, resulting in a higher temperature reading, according to AccuWeather Meteorologist Frank Strait. In addition, these thermometers can also read lower if rain water hits the sensors and evaporates while the car is at a higher speed. Overall, car thermometers give relatively accurate readings, but for various reasons they can be incorrect, so they should not be used as the absolute authority.
Due to the restrictions of a car's thermometers, the best way to know if roads are icy before heading out the door is to be aware of when, where and how black ice forms. The prime times for the development of this ice are around dawn and in the late evening, when temperatures are typically the lowest. During the day, the best thing to do before getting in a vehicle is to take a look at the pavement. Before getting on the roads at night, drivers should be informed of the area's weather conditions, as black ice is hardest to see in the dark, according to Lee. The most common locations for the emergence of black ice are shaded or tree-covered parts of driveways and roadways due to the lack of sunlight and bridges and overpasses because of their ability to freeze quickly. While driving on black ice is similar in some regards to driving on snow, the biggest difference between the two is the amount of traction the vehicle retains.
For more information on each topic shown above, check out the full article at Accuweather.com.
To enable comments sign up for a Disqus account and enter your Disqus shortname in the Articulate node settings.